Image in preparationNeed to see the part? We can ask the manufacturer for a photograph, or show it to you at the warehouse.
G20-L4-0005
Platform bracket for swivel ladder
Steel · galvanised (hot-dip)
Platform fixing bracket for swivel ladder, in hot-dip galvanised sheet steel of 6 mm. Sheet in H with the pivot bearing at the centre and two perforated horizontal flanges with thirteen oblong slots each, for bolting to the platform floor. 650 mm wide by 371 mm high, with 120 mm of projection. Weight 7,8 kg.
Specifications
- Dimensions
- L=650 mm (base width, measured at the bottom of the front view) · H=371 mm (overall height, at the right of the front view) · B=120 mm (depth, from the tip of the trunnion to the rear face of the plate) · sheet thickness 6 mm
- Weight
- 7,8 kg
- Position
- Symmetrical part / not handed
- Vehicle area
- Floor
- Technical data
- Fixing hardware in sheet of 6 mm hot-dip galvanised. DRILLING: sheet in H: thirteen oblong slots on the upper flange and thirteen on the lower one, in a regular row along the whole length; five holes on each of the two sloping faces; and a central round hole in the body, on the axis of symmetry, which is the axis of rotation — in total 26 slots and 11 holes. <».
Identification
- Supplier reference
- TK9395
- Brand
- Takler
- Type
- Component
THE SWIVEL LADDER CANNOT BE FITTED WITHOUT A BRACKET. This is the one for fixing to the PLATFORM (flatbed).