Image in preparationNeed to see the part? We can ask the manufacturer for a photograph, or show it to you at the warehouse.
G20-L4-0004
Chassis bracket for swivel ladder
Steel · galvanised (hot-dip)
Chassis fixing bracket for swivel ladder, in hot-dip galvanised sheet steel of 6 mm. Triangular plate with the pivot bearing at the top, lightened by three slots, and folded drilled foot for bolting to the chassis rail. 323 mm base width by 378 mm high, with 124 mm of projection. Weight 5,8 kg.
Specifications
- Dimensions
- L=323 mm (base width, measured at the bottom of the front view) · H=378 mm (overall height, at the right of the front view) · B=124 mm (depth, from the tip of the trunnion to the rear face of the plate) · sheet thickness 6 mm
- Weight
- 5,8 kg
- Position
- Symmetrical part / not handed
- Vehicle area
- Chassis
- Technical data
- Fixing hardware in sheet of 6 mm hot-dip galvanised. DRILLING: triangular sheet that narrows towards the top: a round hole with a heavy bush next to the apex (is the axle support, and in the side view it corresponds to a protruding cylindrical journal), three stacked oblong lightening slots increasing in size towards the bottom, and a folded foot at the bottom with about four round holes visible in the render. <».
Identification
- Supplier reference
- TK9390
- Brand
- Takler
- Type
- Component
THE SWIVEL LADDER CANNOT BE FITTED WITHOUT A BRACKET. This is the one for fixing to the CHASSIS.