Image in preparationNeed to see the part? We can ask the manufacturer for a photograph, or show it to you at the warehouse.
G20-L4-0003
Aluminium frame for wide-step ladder · 2065 mm
Steel · galvanised (hot-dip)
Aluminium receiving frame for the wide-step pull-out ladder, in hot-dip galvanised steel. It is the frame that is bolted to the chassis and inside which the ladder runs; the aluminium ladder is sold bare and cannot be fitted without it. Frame 2065 mm long by 666,2 mm outer width, profile 68,5 mm high. Weight 14,95 kg. The manufacturer declares conformity UNI EN 131 and safe working load of 150 kg.
Specifications
- Dimensions
- L=2065 mm overall frame length measured externally · B=666,2 mm overall outer width · H=96,5 mm height from the top of the pads to the base of the profile · S=68,5 mm height of the side member profile alone
- Weight
- 14,95 kg
- Load (LC)
- 150 kg safe working load (≈150 daN) — declared by the manufacturer under UNI EN 131
- Position
- Symmetrical part / not handed
- Vehicle area
- Chassis
- Technical data
- Two side rails in folded profile, joined by two cross members, with end caps and a latch hook hanging under the front rail. DRILLING: NEITHER fixing hole drawn anywhere on the part — just a locking latch at the top right-hand side. The publishes render 3D, plan view (dimensions L and B) and side elevation (H on the left, S on the right) — does not have the pair of views OPENED/CLOSED. The dimensioned drawing FROM THE MANUFACTURER'S CATALOGUE corresponds to the TK9710; the TK9715 has no drawing of its own.
Identification
- Supplier reference
- TK9730
- Brand
- Takler
- Type
- Component
THIS FRAMEWORK IS ESSENTIAL FOR THE LADDERS IN THE MANUFACTURER'S CATALOGUE: those are sold bare, without a frame.