Image in preparationNeed to see the part? We can ask the manufacturer for a photograph, or show it to you at the warehouse.
G20-L4-0001
Frame for wide-step ladder · 1210 mm
Steel · galvanised (hot-dip)
Mounting frame for pull-out wide-step ladder, in hot-dip galvanised steel. It is the frame that is bolted to the chassis and inside which the ladder runs; the ladders on the wide-step pages are sold bare and cannot be fitted without it. Frame 1210 mm long by 710 mm outer width, profile 66 mm high, with fixing holes at one end. Weight 10,52 kg.
Specifications
- Dimensions
- L=1210 mm overall frame length measured externally · B=710 mm overall outer width · H=100 mm height from the top of the pads to the base of the profile · S=66 mm height of the side member profile alone
- Weight
- 10,52 kg
- Load (LC)
- 150 kg safe working load (≈150 daN) — declared by the manufacturer under UNI EN 131
- Position
- Symmetrical part / not handed
- Vehicle area
- Chassis
- Technical data
- Two side rails in folded profile, joined by two cross members, with end caps and a latch hook hanging under the front rail. DRILLING: at the end RIGHT-HAND: on the upper side rail a round hole connected to an oblong slot (keyhole) and on the lower one three round holes in line, the middle one larger. The left-hand end finishes straight, with no holes at all.
Identification
- Supplier reference
- TK9710
- Brand
- Takler
- Type
- Component
THIS FRAMEWORK IS ESSENTIAL FOR THE LADDERS IN THE MANUFACTURER'S CATALOGUE: those are sold bare, without a frame.