G21-L2-0010
Chassis bracket w/ washer 54×30mm
Zinc-plated steel · zinc-plated
Chassis clamp in zinc-plated steel, small. Solid forged block of 54 × 30 × 25 mm, notched on the sides, with a through hole of ø10 and a washer of ø22 welded on top, which acts as a seat for the nut. It clamps the body against the chassis rail flange with a single bolt. Weight 0,18 kg. The manufacturer does not declare a permissible load.
Specifications
- Dimensions
- 54 mm overall body length · 30 mm wide · 25 mm height of the forged body (the washer welded on top is not included in this dimension) · through hole ø10 mm · welded washer ø22 mm
- Weight
- 0,18 kg
- Position
- Symmetrical part / not handed
- Vehicle area
- Chassis
- Technical data
- Solid forged block, notched on both long sides (hourglass profile), with sloping side faces — the base is smaller than the top. On the top face, a cylindrical washer WELDED around the central hole: the weld beads can be seen around the washer and along the upper edge. A single fixing hole, round, ø10, concentric with the washer. Not is folded plate. The catalogue publishes neither thickness nor label «E = mm», unlike the sheet brackets in the same section.
Identification
- Part number
- 14140025
- Supplier reference
- 2621 - SC-11
- Brand
- Mecatrailer
- Type
- Component
NO DECLARED LOAD: the manufacturer publishes part number, weight and finish and declares neither a permissible load nor a standard on the chassis brackets.
