G21-L2-0008
Chassis anchor clamp · Ø13 · d1 9 · d2 32
Zinc-plated steel · zinc-plated
Chassis anchoring clamp in zinc-plated steel, from a family of eight that differ only in the trio of holes. It clamps the body to the chassis side member. Sheet of 113 × 61 mm, 6 mm thick, hole of Ø13 mm and fitting dimensions d1 = 9 and d2 = 32 mm — is the trio Ø/d1/d2 that distinguishes each reference in the family. Weight 0,462 kg. The manufacturer does not declare a permissible load.
Specifications
- Dimensions
- 113,0 × 61,0 mm · sheet 6,0 mm · Ø=13 · d1=9 · d2=32 mm
- Weight
- 0,462 kg
- Position
- Symmetrical part / not handed
- Vehicle area
- Chassis
- Technical data
- Family of eight clamps in the manufacturer's catalogue, all in ZINC and all with the same sheet of 113,0 × 61,0 × 6,0 mm. What distinguishes each reference is the trio Ø / d1 / d2, and only the trio: there are three references with Ø13 (4·29, 7·31, 9·32) and three with Ø15 (4·29, 7·31, 9·32), plus two more of another variant with Ø6 and Ø8. This one is the plain variant, with the slot at 38,0 mm and pitch of 40 mm. The catalogue declares neither standard nor load.
Identification
- Part number
- 14140018
- Supplier reference
- 406050104
- Brand
- MRF
- Type
- Component
NO DECLARED LOAD: the manufacturer's catalogue publishes dimensions, weight and finish and states no permissible load for the chassis brackets and clamps. On a part that fixes the body to the chassis rail, that is the missing figure — talk to us before sizing.
