G14-L1-0001
Plate twist lock · height adjustment 65-115 mm
Steel · mill finish / natural
Plate twist lock for commercial bodywork, with height adjustment from 65 to 115 mm — which is which sets it apart from the fixed-height twist locks on the market. Base plate of 185 × 170 mm and 130 mm overall height, 15,87 kg, supplied without zinc plating. Made in accordance with ISO 1496, EN 284 and EN 452.
Specifications
- Dimensions
- Plate twist lock · base plate 185 × 170 · height 130 on the left-hand side and 90 on the right-hand side, measured from the top face of the plate — the casting is ASYMMETRIC and the skirt drops lower on the left · 65-115 between the top face of the plate and the top of the head, dimension printed as RANGE, which on a threaded head is height adjustment travel.
- Weight
- 15,87 kg
- Position
- Symmetrical part / not handed
- Vehicle area
- Chassis
- Technical data
- Cast steel, 15,87 kg — the heaviest part in the range, almost twice the lever twist lock in the same line (8,26 kg). Base plate 185 × 170 mm, bolt-on or weld-on. The casting is ASYMMETRIC: 130 mm high on the left-hand side and 90 mm on the right-hand side, measured from the top face of the plate. The head rises from the plate face by between 65 and 115 mm. Standards: the manufacturer declares ISO 1496, EN 284 and EN 452 for this part number, and the note is unambiguously in its column on page.
Identification
- Part number
- 24010005
- Supplier reference
- 1475
- Brand
- Mecatrailer
- Type
- Component
NOT ZINC-PLATED — the manufacturer supplies the six part numbers in this family in BARE STEEL («sin cincar»), and there is no plated option. On an exposed chassis part that calls for a surface treatment, which we quote separately.
