Quote 0
Home/Products/Load Securing/Weld-on tensioning ring bar · straight band · 95 × 90 mm · h70 · zinc-plated · 3 T
Weld-on tensioning ring bar · straight band · 95 × 90 mm · h70 · zinc-plated · 3 T

Weld-on tensioning ring bar · straight band · 95 × 90 mm · h70 · zinc-plated · 3 T

Steel · zinc-plated

Straight band tensioning ring bar, in Ø12 zinc-plated bar, with a 95 mm bar over a 90 mm backing plate and 70 mm overall height. The uprights run straight down to the backing plate. It is welded to the floor or to the side board. 3 T capacity, certified to UNE-EN 12640:2001.

Specifications

Dimensions
Bar of 95 mm × plate of 90 mm · overall height 70 mm · 30 mm (plate to centreline) · 28 mm (clearance under the bar) · bar section 14 mm · plate thickness 3,5 mm · rod Ø12
Weight
0,30 kg
Load (LC)
3 T.
Position
Symmetrical part / not handed
Vehicle area
Inner
Technical data
Rod Ø12 · rail 95 mm · plate 90 mm · height 70 mm · bar section 14 mm · plate 3,5 mm · zinc-plated · 0,30 kg · capacity 3 T · certified to UNE-EN 12640:2001
Type-approval
Part certified to UNE-EN 12640:2001.

Identification

Part number
27070033
Brand
Mekacor
Type
Component
LASHING POINT to EN 12640. The capacity in tonnes is the strength of the POINT the strap is attached to — it is NOT the LC of a lashing device, which is governed by EN 12195-2 and expressed in daN, as two values. The two quantities are neither comparable nor additive.
+351 252 640 260

I would rather write the message now

‹ Back to load securing