Quote 0
Home/Products/Chassis Brackets/Adjustable Tyre Carrier · 149-245 mm between centres · hex 23 · black painted
Adjustable Tyre Carrier · 149-245 mm between centres · hex 23 · black painted
Technical drawing of Adjustable Tyre Carrier · 149-245 mm between centres · hex 23 · black painted

G20-L1-0007

Adjustable Tyre Carrier · 149-245 mm between centres · hex 23 · black painted

Steel · painted black

Wheel carrier with built-in winch, in black painted steel, adjustable from 149 to 245 mm between centres. It bolts to the chassis through the horizontal flange and is adjusted by a threaded tie rod running in a slot in the base; the vertical flange has six Ø12.5 mm holes. Drum with 1.000 mm of steel cable and a 23 mm hex drive. 210 mm long by 237 mm deep. Weight 5.93 kg.

Specifications

Dimensions
210 mm de comprimento total (cadeia 161 e 100) · 237 mm de profundidade na base · 72 mm de altura exterior · 6× Ø12,5 mm na aba vertical (cadeia 24 · 30 · 70) · accionamento hexagonal de 23 · cabo de 1.000 mm · regulação de 149 a 245 mm entre centros
Weight
5,93 kg
Position
Symmetrical part / not handed
Vehicle area
Chassis
Technical data
Bracket in cut thick sheet, with horizontal fixing flange and vertical six-hole flange for adjustment. Cable drum in the central slot and hexagonal shaft of 23 protruding. Underneath, a threaded tie rod with nut runs in an oblong slot in the base — is that slot which gives the adjustment from 149 to 245 mm between centres.

Identification

Brand
Mekacor
Type
Component
KEY NOT INCLUDED — the operating key is sold separately.
+351 252 640 260

I would rather write the message now

‹ Back to chassis brackets