G20-L1-0001
Echarte fixed step 410×255 mm
Zinc-plated steel · zinc-plated
Fixed stirrup step, in zinc-plated steel, for access to the body. It bolts to a horizontal surface through four holes of Ø10,5 mm, two on each flange, with 380 mm between centres, and stays permanently fitted; the tread plate is perforated anti-slip. 410 mm overall length by 255 mm high, with 320 mm clear span between the arms. Weight 1,19 kg. The manufacturer does not declare a standard or a load for the ladders.
Specifications
- Dimensions
- 410 mm overall length · 380 mm between hole centres · 320 mm clear span between the arms · 255 mm overall height (measured from the top face of the fixing flange) · holes Ø10,5 mm · 70 and 35 mm on the fixing flanges (lower-confidence reading: the render is in perspective and the scale not is reliable in those two dimensions)
- Weight
- 1,19 kg
- Position
- Symmetrical part / not handed
- Vehicle area
- Chassis
- Technical data
- Step in U: two fixing flanges HORIZONTAL at the top, an arm running down from each and the horizontal tread plate joining them at the bottom. Four fixing holes Ø10,5 mm, two per flange, with vertical axis; each flange also has a semicircular notch in the edge. The tread plate has about ten raised-burr anti-slip perforations, in two staggered rows — they are not fixing holes and the catalogue does not dimension them. There is no vertical plate on the part.
Identification
- Part number
- 14070041
- Supplier reference
- 2728
- Brand
- Mecatrailer
- Type
- Component
NO LOAD DECLARATION: the manufacturer declares neither a permissible load nor a standard for this step.