G14-L2-0005
Container corner casting ISO 1161 · lower · diagonal pair DI TD
Steel · mill finish / natural
Shipping container corner casting in cast steel, in accordance with standard ISO 1161, for twist lock. Echarte part number 1473, in the lower position, with 10,86 kg and supplied without zinc plating.
Specifications
- Dimensions
- LOWER CORNER. ENVELOPE OF THE ISO STANDARD 1161: 178 × 162 × 118 mm, confirmed by three independent sources. The MANUFACTURER DOES NOT DIMENSION THIS PART. The only dimensioned drawing by shows the large opening facing UP — is a corner UPPER — and it has no reference assigned and no caption. The face carrying the opening on the lower ones is neither drawn nor dimensioned anywhere in its catalogue. A LOWER CORNER GEOMETRY, confirmed across three independent suppliers that publish it: the two side openings are the SAME oval aperture — 52 × 80 in another source, 51 × 79,5 in another source and in another source. There is no opening in D that the upper ones have on the top face. The large opening is on the face of LOW, dimensioned 125 × 65 by the manufacturer and Ø124 × 63,5 by the manufacturer.
- Weight
- 10,86 kg
- Position
- Lower
- Vehicle area
- Chassis
- Technical data
- Shipping container corner casting ISO 1161, lower position, factory designation «DITD» in the Echarte reference 1473. A NORMA: A ISO 1161:2016 fixes the envelope at 178 × 162 × 118 and imposes far more than dimensions — material with yield strength ≥275 MPa and strength ≥480 MPa, impact energy 27 kJ at −20 °C and 21 kJ at −40 °C, design loads of 942 kN in stacking at the top corner and 1.200 kN at the lower one, testing of at least 2% of the parts per batch, and MARKING MANDATORY ON THE PART with the manufacturer's mark, number of…
Identification
- Part number
- 24130014
- Supplier reference
- 1473
- Brand
- Mecatrailer
- Type
- Kit
NOT ZINC-PLATED — the manufacturer supplies the six part numbers in this family in BARE STEEL («sin cincar»), and there is no plated option. On an exposed chassis part that calls for a surface treatment, which we quote separately.
