G14-L2-0002
Container corner casting ISO 1161 · upper · diagonal pair DD TI
Steel · mill finish / natural
Shipping container corner casting in cast steel, in accordance with standard ISO 1161, for twist lock. Echarte part number 1470, in the upper position, with 10,86 kg and supplied without zinc plating.
Specifications
- Dimensions
- UPPER CORNER. ENVELOPE OF THE ISO STANDARD 1161: 178 × 162 × 118 mm, confirmed by three independent sources. OPENINGS, from the manufacturer's dimensioned drawing — which is that of a corner UPPER: top opening 125 × 65 · aperture on the face of 178 → 52 × 80 · opening on the face of 162 → 65 × 80. The manufacturer publishes, for the same part, top opening Ø124 × 63,5, side aperture 51 × 79,5 and radii R25,5 · R51 · R60 — are the dimensions given in the standard, with the typical half-millimetres of inch conversion.
- Weight
- 10,86 kg
- Position
- Upper
- Vehicle area
- Chassis
- Technical data
- Shipping container corner casting ISO 1161, upper position, factory designation «DD TI» in the Echarte reference 1470. A NORMA: A ISO 1161:2016 fixes the envelope at 178 × 162 × 118 and imposes far more than dimensions — material with yield strength ≥275 MPa and strength ≥480 MPa, impact energy 27 kJ at −20 °C and 21 kJ at −40 °C, design loads of 942 kN in stacking at the top corner and 1.200 kN at the lower one, testing of at least 2% of the parts per batch, and MARKING MANDATORY ON THE PART with the manufacturer's mark, number of…
Identification
- Supplier reference
- 1470
- Brand
- Mecatrailer
- Type
- Kit
NOT ZINC-PLATED — the manufacturer supplies the six part numbers in this family in BARE STEEL («sin cincar»), and there is no plated option. On an exposed chassis part that calls for a surface treatment, which we quote separately.
