G21-L1-0009
Echarte wheel bracket · rims of 5, 6 and 8 holes · 150-220 mm
Steel · painted black
Wheel bracket with integrated winch, in black-painted steel, for rims of 5, 6 and 8 holes at centres from 150 to 220 mm. It bolts to the chassis by the horizontal flange; the vertical flange has oblong slots giving the adjustment. The wheel is secured by two tie plates passing through the holes in the rim and is raised by a drum with steel cable of 1.000 mm. The crank handle and the fixing accessories are included. Weight 5,93 kg.
Specifications
- Dimensions
- Dimensions read off a low-resolution drawing: 103 · 26 · 13 · 57 · 28 · 145 · 190 mm, plus an overall three-digit dimension illegible in the original (2?8). Accessories: plates of 118 mm with hole Ø13, hexagonal operating crank 24 with fork of 24
- Weight
- 6,20 kg
- Position
- Symmetrical part / not handed
- Vehicle area
- Chassis
- Technical data
- Bracket with integrated winch: folded sheet with horizontal flange for bolting to the chassis and vertical flange with oblong slots giving the adjustment from 150 to 220 mm between centres. Drum with steel cable and hexagonal shaft underneath. The wheel is secured by two tie plates passing through the holes in the rim. Prints it, per reference, the reference, the weight, the finish and the model code. Does not declare a standard, does not declare a permissible load and does not publish packaging.
Identification
- Supplier reference
- 3101
- Brand
- Mecatrailer
- Type
- Component
«LLAVE Y ACCESORIOS INCLUIDOS» — printed, in the block for this part number: the operating handle and the tie plates with nuts and washers go in the box.
