Image in preparationNeed to see the part? We can ask the manufacturer for a photograph, or show it to you at the warehouse.
G19-L1-0008
Takler side guard rail · steel ZM 35×100 · 2 lengths
Steel ZM (zinc-magnesium) · steel ZM (zinc-magnesium coating)
Side guard rail (cyclist guard) in steel ZM (zinc-magnesium), open profile in roll-formed sheet, section 35 × 100 mm. Two lengths — 3500 mm (6,6 kg) and 6500 mm (12,2 kg). The zinc-magnesium coating resists corrosion better than ordinary zinc plating for the same thickness. Part numbers TK1410 · TK1440.
Specifications
- Dimensions
- L = 3500 / 6500 mm · B=35 mm · H=100 mm
- Weight
- 6,6 to 12,2 kg depending on the length (1,88 kg/m)
- Position
- Symmetrical part / not handed
- Vehicle area
- Side
- Technical data
- Side guard rail (LPD) for vehicles in categories N2 and N3 and trailers the3 and the4. GEOMETRY: profile OPEN in profiled sheet steel, of thin and uniform thickness, without internal chambers. Longitudinal rib at mid-height on the front face and stiffening corrugations on the top and bottom faces. A wide rear opening — approximately 55 at 60 % of the height — with two return lips forming the fixing track. Linear mass 1,88 kg/m — constant across the whole family.
Identification
- Supplier reference
- TK1410 / TK1440
- Brand
- Takler
- Type
- Component
REGULATED RANGE · LATERAL PROTECTION DEVICE (LPD). Type approval covers the ASSEMBLED DEVICE, not the individual part: rail + end piece + cap + bracket + fixing kit make up the approved configuration. Governed by UNECE Reg. No. 73; the 01 series of amendments is the one in force.
Other products in straight and curved profiles
G19-L1-0004Takler side guard rail · anodised aluminium H250 · 3,5 mno imageG19-L1-0007Takler side guard rail · anodised aluminium 35×100 · 5 lengthsno imageG19-L1-0009Takler side guard rail · anodised aluminium H250 · 4,5 mno imageG19-L1-0006Takler side guard rail · anodised aluminium H250 · 5 lengths