G11-L1-0008
Piano hinge DP08 zinc-plated 60mm × 2500mm
Zinc-plated steel · zinc-plated
Continuous piano hinge from series DP08, in zinc-plated steel, 60 mm wide by 2500 mm long, in sheet of 0,8 mm with shaft Ø2 mm and knuckle Ø4 mm. Drilling Ø3,5 mm, with the first hole at 16 mm from the end and a pitch of ±73 mm. Supplied in bar form and cut to any length on request; is the light-duty level in the range and the same bar makes both sides, with no paired part.
Specifications
- Dimensions
- 60×2500 mm · sheet 0,8 · pin Ø2 · holes Ø3,5 @ ±73
- Weight
- 1,07 kg
- Position
- Symmetrical part / not handed
- Vehicle area
- Crossways
- Technical data
- Series DP08 · sheet 0,8 mm · pin Ø2 mm · width 60 mm · holes Ø3,5 mm, first at 16 mm from the end, pitch ±73 mm · bar of 2 metres, cut to the requested length. Source: manufacturer's catalogue. Declared finishes ON PAGE: AISI 316 2B and AISI 304 ESM — stainless steel only, no zinc-plated or brass. The same series is published in the widths 20, 25, 30, 35, 40, 45, 50, 70, 80 mm. It is the series we hold in stock. Knuckle Ø4 mm.
Identification
- Part number
- 19020007
- Supplier reference
- PIANO60FZ.02-2500
- Brand
- Mecatrailer
- Type
- Component
SIZE TO ORDER: the piano hinge is cut to the length ordered and Ferragibérica also has widths 40, 45 and 50 mm and thicknesses DP10 to DP30.
